Pool builders in Everglades City on 1.2 square miles of river and bay
Everglades City is a small incorporated city where the Barron River empties into Chokoloskee Bay. The 2020 census counted 352 people on 1.2 square miles, down from 400 in 2010. Water makes up 21 percent of that area (Wikipedia). It was once the county seat, and the Old Collier County Courthouse and the Bank of Everglades are among its historic buildings. In 1960 Hurricane Donna destroyed 153 homes across the county and hit this town hard. The county seat moved after it.
New work here has to meet the city's floodplain ordinance and the base flood elevation, and Collier lists a Floodproofing page for the city. So a pool here is a flood-zone project before it's a design project. Our visit starts with the zone and elevation for your parcel, because the equipment pad and the deck grade both hang on them. The new pool construction page shows how the later steps run once the zone is settled.
Zone AE and a 12 foot base flood elevation: what to ask before drawings
At the town's reference point the FEMA flood map shows zone AE, a coastal floodplain, with a static base flood elevation of 12 feet. That's one point, so check your own parcel on FEMA's map. Collier posts a flood zone and base elevation map for the city, along with the city's Floodplain Management Ordinance and a Floodproofing page. The city's own floodplain rules are Ordinance 2023-22.
Collier Floodplain Management publishes elevation certificate and building-standard guidance, so read it with your survey next to you. Then ask the floodplain office what it wants for equipment height, deck grade and fill. Those answers set the plan. Pool builders in Everglades City should lead with that question. We do.
Remodels raise a second question. Under 44 CFR 59.1, an improvement that costs 50 percent or more of a structure's market value brings the whole structure under current rules. Collier asks for its substantial-improvement forms when the scope improves a structure. The local floodplain administrator decides whether a pool or deck alone counts. Give us the full scope early.
Collier staff issue the permit: pool, cage and the swimming pool inspection
Under a July 2018 interlocal agreement, the City of Everglades City contracts with Collier County for building inspections and services, so Collier staff handle pool and enclosure permits here (see Collier's Everglades City page and the city's building department page for the permits desk). The city also goes by the county fee schedule.
The pool file is Collier's standard one: engineered structural detail, a dimensioned plan, TDH calculations, the pump curve, the lighting choice, the deck material and a Residential Swimming Pool Safety Act form naming the barrier. The screen enclosure is a separate Aluminum Structure permit. After that, each swimming pool inspection is called in with the county. The final electrical and barrier inspections come before the shell is filled.
Every suction outlet, meaning the drain or port the pump pulls from, needs entrapment protection installed to ANSI/PHTA/ICC 7. We list the cover on the plans so the reviewer can find it. For the other two routes, the permits guide compares this route with Lee County and Charlotte County.
Bay-edge ground and the relief device that goes under the shell
At the town's reference point, the federal soil survey maps Urban land-Aquents complex, organic substratum, and marks it as not prime farmland. That label describes the point. Your lot may read differently. Wikipedia lists the climate as tropical savanna bordering on tropical monsoon.
For a build, it comes down to this. The water table on your lot sets the dewatering plan for the dig and the hydrostatic relief device the building code asks for in areas of anticipated water table (R4501.21.4). We price both as separate lines, since those are the lines that grow when the lot turns out wet.
The barrier rules are local too. Under the residential code the permit office can approve a permanent feature such as a bulkhead, canal, lake or navigable waterway as a barrier, after it reviews surveys and aerial photographs (chapter 45). Florida's chapter 515 still asks every new pool for at least one safety feature. So we draw the fallback.
Wind, cages and storm-damage permits by the bay
Pool builders in Everglades City plan around hurricane season, which runs June 1 to November 30 and peaks around September 10, according to the National Hurricane Center. Collier puts the minimum design wind speed for a Category II structure at 150 mph, and some regions reach 170 mph under the county's wind map. Your engineer reads the number for your address and designs the cage to it.
The aluminum has its own rules. Members need an actual wall of at least 0.040 inch, and removable vinyl, tempered glass or acrylic panels carry a decal that says to take them out above 75 mph. Collier also says permits for hurricane damage are prioritized. That matters if a cage came down in a storm.
A new cage runs $9 to $16 per sq ft, so a typical job lands at $15,000 to $35,000. Panoramic cages run $25,000 to $80,000+. A rescreen runs $3 to $6 per sq ft. Before the visit, read screen enclosures and the wind code guide.
Resurfacing, renovation or a new shell: what each runs here
Resurfacing a tired pool costs $6,000 to $16,000. Glass bead or a large surface costs $14,000 to $20,000. A full renovation of tile, coping, finish and equipment costs $18,000 to $50,000. A new custom gunite shell runs $65,000 to $150,000+ with a typical 15x30 to 20x40 at $75,000 to $120,000. Luxury work runs $150,000 to $350,000+. A spa retrofit costs $12,000 to $28,000. Pavers for the deck cost $8 to $14 per sq ft. Those are typical ranges. The free written estimate comes after we see the lot.
Collier's online portal lists Resurfacing Pool as its own work item. It asks if the declared value of the work is more than 25 percent of the structure's improved value, which means the scope you describe is the scope that gets reviewed. Pick a finish with the finishes guide, then see pool resurfacing and pool renovation.
Calling pool builders in Everglades City from Naples
Searching for pool renovation contractors near me this far south? By our maps Everglades City is about an hour from Naples, so we build the trip around one good visit. Call (239) 899-6371. You get the same written estimate before any work begins on a pool installation in Naples or Everglades City. Bring your survey, any elevation certificate and photos of the waterline, plus a list of what you want.
Need a pool construction company in Florida's southwest corner that also works the islands? We build in Chokoloskee, Goodland, Marco Island, Isles of Capri and Verona Walk. The permit office changes with the address, and the City of Marco Island runs its own building services. Pool builders in Everglades City answer to Collier staff and the city's floodplain rules. We pull the permit. Under F.S. 713.13 the Notice of Commencement is the owner's to sign and record with the clerk before work starts.
Sources
- Everglades City, Florida, Wikipedia
- Everglades City and Building Department, Collier County Growth Management
- Building Department, City of Everglades City
- Pool (PRSPL) application requirements, Collier County Growth Management
- Collier County Floodplain Management, Collier County
- National Flood Hazard Layer, FEMA
- 44 CFR 59.1 Definitions, Legal Information Institute (Cornell)
- Florida Building Code Residential 2023, Chapter 45, Florida Building Commission
- Florida Statutes Chapter 515 (Residential Swimming Pool Safety Act), Florida Legislature
- Atlantic hurricane climatology, NOAA National Hurricane Center
- Permit Information Post-Hurricane, Collier County Growth Management




