Pool builders in Placida: 3 feet up, where CR 771 becomes CR 775
Placida has ZIP code 33946 and sits close to where CR 771 turns into CR 775. Coral Creek empties into Gasparilla Sound here, and the ground stands about 3 feet above sea level. The Placida entry has the map details.
Low ground rewrites the plan. We want three things before anyone draws a gunite shell: your flood zone, your survey and a look at where the water sits after a hard rain. Naples Swimming Pool Construction Co builds out of Naples, a bit under two hours down the road. Searching for pool builders near me? Placida is on our route, and the first yard visit is free.
Mainland Charlotte County, island Lee County: which desk reads your plans
Placida is where you leave the mainland for Gasparilla Island. The island straddles Charlotte and Lee counties, with the Gulf on its west side and Charlotte Harbor on its east. Charlotte County Community Development handles the mainland. A house out on the island can answer to a different office. That's why we ask for the parcel number before we quote.
Your neighbor's permit rules may not be yours. Two lots minutes apart, one mainland and one island, can file with different counties. Our Boca Grande page covers the island side, and Bokeelia is another Lee County community we build in. Your property record names the county, and a call to the permit office confirms it. Should a Lee County office own your address, we follow its list and file through its eConnect portal, which Lee requires contractors to use.
Your steps are the same either way. Sign the estimate, we file, and the permit office tells us what it needs. We pass each question to you the day it comes in.
What a 3 foot lot asks of a gunite shell
Federal rules define a coastal high hazard area as ground hit by high velocity wave action, and Zones V, VE and V1-30 mark the special hazard zones. Residential pool work in Coastal A or V zones needs signed and sealed engineering in Charlotte County, and building review looks at wind loads and flood loads. Look your parcel up on FEMA's flood map and bring the zone along to the visit.
Next comes groundwater. The Florida Building Code asks for an approved hydrostatic relief device wherever a high water table is expected, and on a lot this low we plan for one. Pumping the hole dry is a line of its own in the estimate. As pool builders in Placida, we also set the equipment pad above the low spot of the lot, since a pump sitting in standing water doesn't last.
When sealed engineering is needed, it's its own drawing set, so the flood check goes first.
Wind on open water: cages, panels and pavers
Wind gets a long run at a cage when open water sits close by. The Florida Building Code sets a minimum wall thickness for aluminum screen enclosure members. It also requires vinyl, glass and acrylic panels to be removable and decaled so they come out when winds pass 75 mph. Our screen enclosure wind code guide explains the loads in plain words.
Cage prices start with $9 to $16 per sq ft for a new aluminum frame, which makes a typical job $15,000 to $35,000. A panoramic design is $25,000 to $80,000+. Rescreening a worn frame costs $3 to $6 per sq ft. For the deck, pavers are $8 to $14 per sq ft and travertine is $14 to $30. That puts 600 sq ft of pavers comes to $4,800 to $8,400. Read more on screen enclosures and pool decks.
Refinishing an older shell on the Placida side of the sound
Plaster, tile line and coping all age together. A resurface runs $6,000 to $16,000 for a typical residential shell, and a full renovation covering tile, coping, finish and equipment costs $18,000 to $50,000. Our finish guide compares plaster, quartz and pebble, so you can choose before the crew arrives.
A spa added to an existing shell costs $12,000 to $28,000. A waterfall or sheer descent costs $6,000 to $15,000. Before we start, ask the county office whether your scope needs its own permit. Each line goes into the written estimate, so you can compare it with any other bid. More detail sits on pool resurfacing and spas and water features.
Hiring pool builders in Placida: the trip from Naples and the free visit
Plan on $65,000 to $150,000+ for a custom gunite pool. The typical 15x30 to 20x40 sizes with a standard deck land at $75,000 to $120,000. Luxury work reaches $150,000 to $350,000+. Those are typical ranges, and we price your yard once we've seen it. As pool builders in Placida, we put the number in writing before work begins. The pool cost guide explains what moves a price, and new pool construction covers the build.
We also work in Grove City, Rotonda West and Englewood. Call (239) 899-6371 or use the contact page. Bring your survey and flood zone, and we take it from there. A seawall, a dock or a tree you want to keep? Point it out at the visit. When a tree has to come down, Charlotte County asks for a Tree Permit Application filed with the pool application. Those details move the shell, and moving a line on paper costs less than moving a dig.
Sources
- Residential Pool or Spa, Charlotte County Community Development
- Placida, Florida, Wikipedia
- Gasparilla Island, Wikipedia
- F.S. 713.135 Notice of commencement, Florida Legislature
- 2023 FBC-Residential, Section R4501, ICC Florida Building Code via UpCodes
- 2023 FBC-Building, Chapter 20 Aluminum, ICC Florida Building Code via UpCodes
- 44 CFR 59.1 Definitions, Cornell Legal Information Institute
- F.S. 713.13 Notice of commencement, Florida Legislature




